Description
A Turnstile Foundation Frame is required for turnstiles to be mounted on an uneven surface, for example in case of pavers or gravel. A level concrete mounting surface is required for correct mounting of the foundation frame. It should be approx. 150 mm below the finished surface.
The foundation frame must be positioned in its desired location taking care on which side (right or left), you want to place part 2. This is important in case you want to mount access control units.
Installation of the foundation frame:
• First of all put the frame in place
• Drill the fixing holes
• Insert the fixing screws
• Install the foundation frame by means of jackscrews in water
(if needed, even out with suitable underlayment)
• Then fix the foundation frame
• Pay attention to correct cable guiding to the turnstile
• Empty conduits must not be squeezed
• Please consider the cure time of the chemical anchor studs
With the installed foundation frame, the mounting of the turnstile can be carried out in the same way as on a concrete foundation.
Item# FURAT3 Foundation frame for MPT*3* without roof
