Description
Open and close turnstiles and gates with the push of a button! Hardwired desk panels with one or two buttons allow you to control your entrance and exit devices. Perfect for installation at a security desk, front desk, or reception area.
For barrier control in gatekeeper operation At entrances to companies and authorities, a gatekeeper often checks the identity of visitors before opening the barrier at the push of a button. For this type of control, control panels are available in versions for one barrier (PULT01) and for two barriers (PULT02). Two push buttons can be used to open or close the barrier boom from the gatekeeper’s booth, and one push button with memory function enables permanent opening. Another push button with memory function can be assigned as required.
The integrated LEDs indicate the current status of the barrier boom (open, permanently open, closed). The control panels can be used with all our M Series barriers and in all operating modes (modes 1 to 8). A separate connection cable is routed out of the control panel for each barrier and can be easily connected to the connection boxes provided on site. If required, several control panels can be connected in parallel to the barrier control from different control points.
The 1-channel version PULT01 can control only one barrier or one pedestrian gate, with PULT02 two independent barriers or pedestrian gates or also a combination of a barrier and a pedestrian gate can be controlled. A sheet with standardized sticker symbols is supplied. This can be used to paste over the membrane buttons if another function is to be switched with it. White blank stickers are also supplied, with which the membrane buttons can also be labelled using a waterproof pen if required.
