Clear polycarbonate arms and curved acrylic shield assembly provide
aesthetic appeal while maintaining the functions of a dual rotor turnstile.
Heavy-duty construction ensures durability and trouble-free operation. 1
1/4" x 3" arms provide clear, see-through effect while maintaining
structural integrity and impenetrability. Available in 84" or 96" width.
Standard construction is clear anodized aluminum. Other finishes include;
color anodized aluminum, stainless steel, powder coated steel, bronze or
brass. All turnstiles include a stainless steel middle barrier to prevent
unauthorized entry through midsection of turnstile. Double gate can have up
to 4 control points, two entry's and two exits.
| Indicator Lights |
Set of red and green lights to indicate of turnstile is
locked or unlocked. One set per electrically direction. |
| 96" or 84" Width |
Standard turnstile is 96" (8 feet) wide. Space saving
version with 84" (7 feet) width is also available. |
| Pulse Relay |
Allows one rotation per valid "go" signal regardless of
the signal length. |
| Time-out Relay |
Relay to automatically relock turnstile within a preset
time if a person cards in and unlocks turnstile but does not go through.
|
| Rotation Detection Switch |
Provides a Form "C" contact closure to the access
control system for remote counting and monitoring of turnstile
rotations. |
| 3 or 4 Rotor Sections |
Available with 3 rotor sections (120 degrees apart) or
4 rotor sections (90 degrees apart). |
| Fail-lock or Fail-safe |
For electrically controlled direction. Status of
turnstile when there is no power. Fail-lock direction is locked,
fail-safe is free wheeling. |
| Electrical Controls |
Electrical controls for entry only, exit only or
independent bi-directional electrical controls for entry and exit. |
| Free or Locked Operation |
For mechanical operation, direction is always locked or
always free rotating. |
| Remote Pushbutton |
Allows turnstile to be released from remote location.
|
| Electronic Key Bypass |
Key to allow turnstile to be held open, overriding card
reader. |
| Mechanical Key Bypass |
Key to allow fail-lock direction to be opened during
power failure. Standard for fail-lock applications. |
| Solenoid Activation Switch |
Provides a Form "C" contact closure to access control
system that turnstile solenoid has been activated. |
| Card Reader Mounting Plate |
Plate to allow mounting of reader on shield post. |
| Hydraulic Speed Control |
Heavy duty shock and gear system that controls rotation
speed of turnstile to minimize abuse and provide increased ease of use.
Standard feature for polycarbonate turnstiles. |
| Voltage |
Transformer to step down from 110 VAC or 220 VAC. |
| Home Position Switch |
Provides a Form "C" contact closure to access control
system when the turnstile is in home position. |
