| Heavy-Duty Magnetic Lock | | Part # | Part Name | Description | | MAG68 | MAG68 | 1200lb Dual Voltage Bracket Mount LED Offset Strike Magnalock | Model 68 has a holding power of 1200 pounds while still offering the same built in splice chamber and NEW bracket mount design as the M38.
As with the M62,on which it was based, the M68 is appropriate for exterior and perimeter doors through which criminals could gain entrance to cause substantial economic loss. Entry cannot be forced without special tools, or before the door and frame actually give way. | | | $ 470.00 |
| Maglock | | Part # | Part Name | Description | | M32M | Magnalock 600lbs. | 12/24 VDC Metric |
The Model 32 series provides 600 pounds traffic control security similar to electric strikes, and is recommended for applications where a physical assault on the door is not expected. Primary advantages of the Model 32 are lower cost and more compact size. NEW: Now in dual voltage. | | | $ 385.00 |
|
|
| Electronic Door Strike | | Part # | Part Name | Description | | UNL-12 | UnLatch | UNL-12: UnLatch Motorized Strike 12VDC Six Wire |
Turnstile UnLatch is a completely new type of electric door releasing device which sweeps away the limitations inherent in traditional electric strike designs. The UnLatch screws into the existing doorframe in seconds. There is no need for routing a special cut-out. This not only saves on installation labor, but maintains the original strength and integrity of the door frame and yields a fully concealed installation for maximum esthetic appeal. | | | $375.00 |
| |
| Part # | Part Name | Description | | MUNL-24 | Mortise UnLatch Motorized Electronic Strike | UnLatch Motorized Mortise 24 VDC |
All the amazing benefits of the original UnLatch� are retained (easy install, full dead latch function, release under pressure and latch status sensing) and a dramatic new one is added: the Mortise UnLatch� includes field adjustability for latch and deadlatch positions so that one model works with virtually all North American Mortise Locks. | | | |
|
All Devices come complete with AutoCad Installation Schematics,
Power Supplies, and Plenum-Rated Connecting Cable.
Use with www.EntraPass.com - or your existing Card Access System.
|
|
|
|
|
|
| | Exit Button with LED | | Part # | Part Name | Description | | PB3 | Push Button-3/4" Rct | PB3: Push Button-3/4" Rct Mom Sgl Gang | Smallest size and the Most Options The PB3 is a compact (1" x 1-3/4") push button which is also short in length so it can be supplied on a narrow stile plate (Model PB3N) and installed directly on aluminum glass door narrow stile frames. The PB3 switch has 3 Amp, DPST, UL listed contacts and it can be converted to DPDT in the field. A backbox is supplied on single gang versions and 12-24 VDC bi-color illumination is standard. An alternate action version (Model PB3A) is available, as well as a non-illuminated version (model PB3E). A surface mount version is available (PB3ER), which is perfect for mounting under a desk. | | | $ 128.00 |
| Exit Push Button with LED | | Part # | Part Name | Description | | PB | Push Button 1-1/2 Rd | PB: Push Button 1-1/2 Rd Mom Sgl Gang |
"Top to the Line" The model PB features an industrial grade 1-1/2" mushroom button with 7 Amp DPST (NO/NC) contacts. It is water proof (NEMA4) and includes 12-24 VDC bi-color illuminations. The button itself illuminates green from a multi-chip LED and there is also a super-bright red LED. Momentary or alternate (Model PBA) contacts may be chosen and the switch is UL Lists. the model PB is available on single gang plates only and is delivered with an indoor backbox. | | | $ 175.00 |
|
|
|
| Handicap Operator for ADA Gate | | Part # | Part Name | Description | | PB2H | Push Button- 2" Sq. | PB2H: Push Button 2" Sq. Mom W / Handicap |
For more Turnstile Product Information
Please call 1-303-670-1099
Patrick McAllister | | | $ 170.00 |
|
|
| Prison-Grade Locking | | Part # | Part Name | Description | | MM15DT | MM15DT | 4000 lb. Electromechanical Maglock, Satin Stainless, Door Position/Tamper Switches Option |
MM15 is a 4000 lb. holding force dual voltage, dual current Maglock for interior or exterior doors. It is fail safe, but can be installed with a battery backup power supply.
MM15 is available in three different finishes determined by means of a snap-on metal dress cover that also screws into the front of the lock body for added protection. The stainless dress cover is provided standard with the MM15. | | | $ 497.50 |
|
|
|
