High Security Turnstiles
Dust-Tight & Heavy Seas Protected
Patrick.McAllister@TURNSTILES.us
Direct: 303 670 1099 * Fax: 303 679 8949
Full Height High Security Turnstiles
for use in extreme weather environments
FH320-S-S
$ 9,440.00
FH320-S-T
$ 19,158.00
FH320-S-P
$ 10,140.00
Standard Equipment:
- All bearings are permanently lubricated.
- Mechanically fastened arms (stronger than welded) and easily replaced if damaged.
- All locking components are hardened steel.
- Delrin main indexing cam provides years of maintenance free reliability.
- Bronze oil-impregnated bushings for low maintenance.
- Adjustable hydraulic speed control.
- Hot dipped galvanized finish.
- 24 volt operating system.
- Adjustable timer.
- Fail lock or fail safe.
- Heavy duty pull type solenoid.
- Dry contact relay.
- 12 volt or 24 volt pulse relay.
- Powder coat finish.
- Indicating lights.
- Card reader mounting plate.
- Coin or token acceptors.
- Electronic counter.
- Computer interface module.
- Push button release.
- Full stainless steel construction
polished to a #4 finish. - Outer frame consists of 2” square
14ga tube. - Vertical bars are 1 ¼” 16 ga tube with 5/16” thick center support.
- Verticals are welded at 3 locations, top, bottom and at the horizontal center support.
- Powder coat finish.
- Indicating lights red/green.
- Card reader mounting plate.
- Galvanized Finish.
- Remote Push button.
email: patrick.mcallister@TURNSTILES.us
